Overall Specifications yes___ no___ Rated Net Power (ISO 9249) shall be no less than 56.9 hp (42.4 kW) Engine yes___ no___ Engine shall be certified to EPA Final Tier 4/EU Stage IV yes___ no___ Engine shall have four cylinders and a displacement of no less than 202 cu in (3.3 L) yes___ no___ Engine shall have auto-idle mode to reduce engine speed when hydraulics are not in use to reduce fuel consumption and noise yes___ no___ Engine oil interval shall have a scheduled 500-hour interval for reduced operating costs yes___ no___ Fuel filter shall include a water separator yes___ no___ Off-level capacity shall be no less than 35 degrees yes___ no___ The engine will have a cold start aid such as glow plugs yes___ no___ The engine oil and fuel filters will be remotely mounted for ease of access Cooling yes___ no___ Engine coolant shall protect the machine to temperature of -34°F (-37°C) yes___ no___ The radiator and oil cooler will be protected with a trash screen to protect against debris entering coolers yes___ no___ A fan guard inside the engine compartment will help prevent contact with the engine fan blades. Power Train yes___ no___ Two speed propel will be standard with auto-shifting when travel motors encounter heavier load. A switch will be provided to allow selection of either high or low speed propel yes___ no___ In low travel speed, the machine shall reach 1.9 mph (3.1 km/h) and in high speed shall reach 3.1 mph (5.0 km/h) yes___ no___ The hydraulic pilot levers shall have short stroke and low effort to reduce fatigue. yes___ no___ The Swing brake shall be wet disk, or equivalent, spring applied and hydraulically released yes___ no___ The propel brake shall be spring applied and hydraulically released Hydraulics yes___ no___ The hydraulic system shall be open center, load sensing yes___ no___ The main pumps shall be three variable-displacement axial-piston pumps with maximum flow of 2 x 19 + 15 gpm. yes___ no___ Boom and arm shall have reduced drift valves for greater stability and positioning Electrical yes___ no___ The electrical system shall be 24 volt and alternator rating no less than 50 amp yes___ no___ Two work lights shall be provided: one mounted on the frame, the other on the boom yes___ no___ The fuse box shall be in the cab, well protected from the elements and shall be opened without tools.
