Specifications include, but are not limited to: • Disconnect and dispose off-site in its entirety the existing Carrier chiller including the (2) associated air cooled condensing units. • Provide (1) Trane Series RTAC air cooled chiller with remote evaporator to replace existing and to be connected to existing piping. Provide and install all the necessary piping (i.e. refrigerant, etc.), valves, fittings, etc. as required to make final connections/tie-ins from new to existing piping system. Provide additional connections and accessories as needed. The new chiller is to match the capacity of the existing being replace. Provide all the required electric, wiring and control work as needed. THE CHILLER IS TO BE 100% OPERABLE AFTER INSTALATION AND PIPING IS TO BE LEAK FREE. CHECK, TEST & STARTUP UPON COMPLETION. • Place new chiller onto existing concrete pad where the (2) associated air cooled condensing units were removed.