All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: The Kent State University College of Aeronautics and Engineering is funded under the Ohio RAPIDS 5 grant program to procure one handheld, wireless, 3D scanner. As part of the RAPIDS 5 proposal process, the College evaluated multiple options and based its proposal to the Ohio Department of Higher Education on the Artec Leo scanner (2022). This solicitation is for the following or equivalent: • Artec Leo scanner education package • Associated training – may be web-based. • Shipping • Two (2)-year warranty; Physical Characteristics 1) Power: Exchangeable battery and optional AC power / Weight: Not to exceed 6 lbs preferred 2) Dimensions: HxDxW: 231 x 162 x 230 mm or similar Functional Characteristics (preferred or similar) 1) Accuracy and resolution a. 3D point accuracy: up to 0.1 mm b. 3D resolution: up to 0.2 mm c. 3D accuracy over distance: up to 0.1 mm + 0.3 mm/m 2) Algorithms a. HD mode b. Hybrid geometry and texture tracking c. Geometry and texture-based data processing d. Auto background removal 3) Field of view a. Working distance: 0.35 – 1.2 m b. Volume capture zone: 160,000 cm3 c. Linear field of view, HxW at closest range: 244 x 142 mm d. Linear field of view, HxW at furthest range: 838 x 488 mm e. Angular field of view, HxW 38.5 x 23 degrees 4) Texture a. Texture resolution: 2.3 mp / Colors: 24 bpp /Ability to use photo texture 5) Capture rate a. 3D reconstruction rate for real-time fusion: up to 22 fps b. 3D reconstruction rate for 3D video recording: up to 44 fps c. 3D reconstruction rate for video streaming: up to 80 fps d. 3D and 2D exposure time: 0.0002 s 6) Computer requirements a. Interface: Wi-Fi, Ethernet, SD Card b. Internal hard drive: 512 GB SSD 7) Computer requirements a. Only needed for data processing, Scanning does not require computer.
