Specifications include, but are not limited to: 1A.Bid most current model year made available. 2A.Aluminum Frame Type/Body with flat floor3A.All Aluminum Hub Piloted Wheels4A.Minimum 28’ from Kingpin to Center of Rear Axle5A.Approximately 102” Wide Body6A.Trailer Length: 33’ –35’ long7A.Triaxle Chassis8A.Smooth Side Design9A.Side Wall Height: Between 65” –67”10A.Ground-Controlled Two-Way Tailgate11A.Spring Brakes on at least two axles12A.Suspension Pressure Gauge13A.Water Resistant Electric Cable Sliding Tarp14A.Two-Speed landing gear15A.Brake System: OEM standard air brake system must be included16A.Plumbed for in cab control of tailgate release, suspension dump and axle lift. In addition to controls located on trailer frame. 17A.Air Suspension with liftable front axle18A.Lighting: All LED lighting is required, must be meet all federal and state laws. 19A.Ladder at rear on driver’s side20A.Rear Fenders and mud flaps 21A.Rubber Cushions between Frame and Body22A.Dura-Brite or Equivalent Outers 23A.Plastic Liner24A.Shovel Hanger25A.Man-Door at Front26A.Coal Door27A.Rubber Seal for Tailgate28A.Trailer Plug: Trailer must be attached with trailer plug and wiring according to Attachment Abelow.