Specifications include, but are not limited to: One (1) 54” whelen Legacy WeCanX DUO super-led light bar PN# EB2SP3J-T with take down and alley lights. Red blue light bar with true center take downs. Light bar mounting kit as needed Two (2) Whelen projector compact 100W nylon composite speakers PN# SA315U with 122db rating Speaker mounting kit as needed One (1) Whelen cencom core PN# C399 – amplifier control module. Shall be capable of flashing headlights and taillights as well as light bar control One (1) Whelen cencom core controls and cable PN# CCTL6 with 8 push buttons, 4 position slide switch and 7 position rotary knob as well as traffic advisor switches One (1) amplifier for WeCanX, PN# CEXAMP One (1) Cencom core vehicle sync module to sync vehicle to other CPD vehicles with cencom core units. PN# CV2V One (1) whelen 16 output, 4input light bar expansion module PN# CEM16 Two (2) whelen PN# I2D ion red/white light to be installed in front grille Two (2) whelen PN# I2E ion blue/white light to be installed in front grille Sixteen (16) whelen PN# TLI2J ion red/blue lights to be installed as follows: 2 rear utility bed lower corner 2 high facing rear 2 front side fenders near headlights 2 each side across the top of the utility bed 2 each side above rear wheel One (1) Whelen dual avenger II solo red/blue dash light, PN# AVW21RB One (1) swivel mount for avenger light One (1) Traffic advisor mounted on rear bulkhead above utility bed, PN# TAM85 Traffic advisor controller to be mounted in cab Two (2) Whelen micro pioneer recessed mounted scene lights at rear bumper PN# 2100WHE One (1) perimeter enhancement light PEL2B to illuminate the rear main storage area of the bed. Two (2) adjustable work lights shall be installed on the bed, one on each side above the horizontal compartment. The lights shall be white flood lights with swivel base Whelen PN# P46WL or equivalent One (1) bumper, Satina PB400VS or equivalent Driver’s seats shall be covered with tiger tough seat cover One (1) lockable under seat storage box, Havis PN# C-SBX-104 Axon camera refresh wiring and antenna kit
