Specifications include, but are not limited to: ITEM NO. 1: John Deer 410 P-Tier Backhoe Loader or equivalent. 3.3.1.1 STANDARD EQUIPMENT: The Backhoe loader specified within this document, unless otherwise noted, shall have the following standard equipment at a minimum. 3.3.1.2 ENGINE 3.3.1.2.1 The engine shall be a minimum 116HP Tier IV compliant Diesel Engine compatible to run on B20 diesel fuel 3.3.1.2.2 Cooling fan shall be electronic controlled variable rate 3.3.1.2.3 Block heater optional 3.3.1.3 TRANSMISSION 3.3.1.3.1 Transmission shall be hydraulic with electronic clutch cutoff on loader lever. 3.3.1.4 AXLE 3.3.1.4.1 Backhoe must be four-wheel drive. 3.3.1.5 HYDRAULICS 3.3.1.5.1 Backhoe loader shall have a hydraulic system minimum 43GPM @ 2,200RPM system relief pressure 3.3.1.5.2 The system shall include aux ports on end of boom as well as at rear of loader. Both ports shall be plumbed independent of each other and valve controlled in cab. 3.3.1.5.3 A hydraulic oil level sight gauge. 3.3.1.5.4 System shall include neutral start protection. 3.3.1.5.5 Controls shall be pilot controls with pattern select for backhoe. Loader controls shall be MFWD quick shift. 3.3.1.6 ELECTRICAL SYSTEM 3.3.1.6.1 The electrical system shall be equipped with the following features: 3.3.1.6.2 12-volt electrical system with minimum 145-amp alternator and dual batteries 3.3.1.6.3 4 front led work lights 3.3.1.6.4 4 rear led work lights 3.3.1.6.5 2 side led docking lights 3.3.1.6.6 2 front and rear turn signals and flashers...