Specifications include, but are not limited to: 3.3 Item #1: One (1) new and unused Mac Trailer Manufacturing Aluminum Framed 38 foot Half Round Trailers or equal TRAILER CLASSIFICATION: 3.3.1 Trailer shall have an operating tare weight maximum of 16,000 pounds 3.3.2 Trailer shall have a load profile of 80,000 pounds GVWR 3.3.3 Shall have a capacity of at least 44 cubic yards. 3.3.4 Successful bidder shall provide builder’s drawing of trailer for approval BODY: 3.3.5 Dump height shall be minimum 32 inches; Distance from ground to lowest point of the bed during the dump cycles must not be less than 32 inches to allow loading over a hopper wall. 3.3.6 Floor length shall be at least 36 feet 3.3.7 Width shall be a minimum of 94 inches wide and a maximum of 96 inches wide 3.3.8 Floor shall be a minimum of ¼ inch thick aluminum sheets 3.3.9 Side walls shall be a minimum of 3/16 inch thick aluminum sheets 3.3.10 Floor liner shall polyethylene material with a minimum dimensions of 3/8 inches x 5 feet x 35 feet 3.3.11 Trailer shall be equipped with a body hold down 3.3.12 Tailgate shall have a water tight seal. Seal should be able to have a grease coating so seal does not stick and pull out of its channel. Seal can be rubber or an alternate non-stick composition 3.3.13 Wall height shall be a minimum of 60 inches and a maximum of 66 inches 3.3.14 Rear axle shall have full width mud flaps 3.3.15 Front axle shall have mud flaps in front of the tires