The Tiffin Developmental Center is seeking quotes from qualified contractors to provide asphalt services per the requirements and specifications listed below. Prior to resurfacing, area will be milled 1.5 inches and thoroughly cleaned of loose debris, free of surface moisture and primed with SS1H Emulsion, or equivalent to ensure bond between existing surface and new asphalt overlay. Apply 1.5-inches of Type 448-1 asphalt pavement and shall comply with MAG, Standards for type and construction conditions during placement, working to a uniform surface, and rolled to a smooth and even finish with a power steel wheel roller. http://www.azmag.gov/portals/0/Documents/1999metric-specs.pdf Manhole and curbs inlets adjustments as necessary. All edges of areas repaired shall be level with the surrounding pavement. Provide positive drainage. The contractor will be responsible for measuring/verifying the designated areas during the designated site visit. The contractor is Provide controls for access and egress to building(s) from parking areas during the project.
