The anticipated Project scope of preliminary design, project design, bidding, and negotiation services follows FAA AC 150/5100-14E Change 1, including but not limited to, sections 1.4.2.1 – 1.4.2.3 and 1.5; designing Project in accordance with, but not limited to FAA AC 150-5370-10H, and any other appropriate FAA ACs or design standards: • Hold, at minimum, regularly scheduled bi-weekly meetings with SRMP, which includes the airlines, FAA, tenants, Department and other stakeholders. • Geo-technical investigation and surveys. • Survey data collection and submittal to FAA in accordance with FAA ACs 15/5300- 16B and 150/5300-18B. • Design full-depth reconstruction of 8,000 feet of Runway 6R-24L. • Design drainage – including underdrains and infield drainage upgrades, as necessary. • Design rehabilitation or reconstruction of taxiway connectors located in the Runway 6R-24L RSA & ROFA where the pavement has met its useful life. • Identify and design the relocation of obstructions in the ROFA – including, but not limited to three (3) wind cones/socks. • Design the blast pad reconstruction. • Design shoulder reconstruction to meet design standards of the current critical aircraft, with an alternate (not part of FAA funding) to design the shoulders to the next higher design standard. • Design signage and marking for all areas rehabilitated, reconstructed, or disturbed by the Project. • Preparation of materials specifications. • Prepare/assist with airspace analysis and any associated FAA submittals. • Knowledge and experience conducting Safety Assessment Screenings (“SAS”). • Perform site work design and stormwater analysis in accordance with city, state and federal standards. • Prepare detailed plans, specifications, cost estimates and design/construction schedules, meeting all FAA standards and requirements. • Coordinate with federal, state, and local agencies for design plans and specification reviews, including all revisions. • Print and provide necessary copies of engineering drawings, plans and contract specifications. • Construction Safety Phasing Plans (“CSPP”). • Assistance with bidding/bid process management. • Ensure proper permits, including any environmental permits are in place. • Communicate with necessary outside agencies (city, state, federal) for coordination and permitting, including but not limited to EPA SWPPP and other environmental permits. • FAA Grant Application support.
