Cuyahoga County seeks twelve (12) sets of Dive Response equipment, to be distributed to four regional dive teams. All quotes submitted in the Supplier Portal must include a standard company quote noting part numbers/descriptions. 12 EA: Full face mask and regulator assembly suitable for cold-weather diving meeting the NFPA 1006 Standard on Technical Rescue Personnel Professional Qualifications 18.3.2 Select and use PPE, given a subsurface mission and personal protective and life-support equipment, so that rescuer is protected from temperature extremes and environmental hazards and is compatible with the underwater communication system below. Includes a protective mask bag. Earphone-Microphone assembly compatible with the above full-face mask and hard-wired underwater communication system. A Hi Use compatible HUC connection - 4P - 2 pin, 2 socket- shall be supplied to complete the connection to the communication rope. See attached for complete specifications-capabilities. Back inflation buoyancy compensator device - BCD. The BCD should be designed by the manufacturer to meet the needs of public safety diving. The power inflator device should allow for use as an alternate air source from the main tank and will meet the as a second stage regulator per NFPA 1670 3.3.2 Alternate Air Source: See attached for complete specifications-capabilities; (12) Redundant air supply package: 19 Cubic foot minimum Aluminum 3000 psi Air Tank with yoke fitting, Reg/valve with gauge and 2nd stage regulator with a hose, suitable for cold-water diving in accordance with NFPA 1670 A.3.3.107 Redundant Air System. (12) Redundant air supply mount. Can be used on the right or left side of primary air supply tank. Redundant air supply can be mounted either upward or downward. NFPA 1670 3.3.107 - Redundant Air System. A system composed of a compressed breathing gas source, pressure gauge, primary and secondary regulator, and a means of affixing the system to the diver so that it will not be dropped or dislodged; is completely independent of the diver's primary air system; (12) SCUBA 1st Stage Regulator: Yoke fitting, specified for cold-water and freezing, manufactured with the capability of being utilized for public safety dive operations
