Qty 1 John Bryan Lower Shelter Roof Remove and dispose, provide material for Installation of Lifetime Warranty 3-Dimensional fiberglass shingles, with Hip and Ridge shingles. 7/8 Felt staples, Rhino Wrap, Ice Water Shield, 1 ¼ Inch Coil roofing nails. Install Lomanco omniridge vent with Sol Seal 900 silicon. Install 1 ½ inch x 3 Inch aluminum white drip edge. Install California cut valley, step flash and counter flash chimney. Be sure to include shipping costs. Work should be completed during the hours of 8 AM to 4 PM Monday thru Friday ADDITIONAL LUMBER: Please quote per board and by foot for lumber a price to base any repairs necessary from rot upon the removal of the existing roof. This wood will need to be Invoiced separately upon finalization of the project. Qty 1 John Bryan Maintenance Shop Roof This roof is approximately 3,458 square feet with an attached shed that has a flat roof that is approximately 135 square feet. Remove and dispose, provide material for Installation of Lifetime Warranty 3-Dimensional fiberglass shingles, with Hip and Ridge shingles. 7/8 Felt staples, Rhino Wrap, Ice Water Shield, Flintastic, Base Sheet, 1 ¼ Inch Coil roofing nails. Install Aluminum 750 Roof vents with Sol Seal 900 silicon. Install 1 ½ inch x 3 Inch aluminum white drip edge. Install 3-inch Fiberglass flashing boots. Replace all the Trim boards with new wood, include in project. Include addition of more vents and their installation to provide optimum ventilation. Be sure to include shipping costs. Work should be completed during the hours of 8 AM to 4 PM Monday thru Friday. ADDITIONAL LUMBER: Please quote per board and by foot for lumber a price to base any repairs necessary from rot upon the removal of the existing roof. This will need to be invoiced separately upon finalization of the project. Qty 1 John Bryan Fuel Storage Building This roof is a flat roof is approximately 170 square feet. Remove and dispose, provide material for Installation of Lifetime Warranty 3-Dimensional fiberglass shingles, with Hip and Ridge shingles. 7/8 Felt staples, Rhino Wrap, Ice Water Shield, 1 ¼ Inch Coil roofing nails. Sol Seal 900 silicon. Install 1 ½ inch x 3 Inch aluminum white drip edge. Be sure to include shipping costs Work should be completed during the hours of 8 AM to 4 PM Monday thru Friday. ADDITIONAL LUMBER: Please quote per board and by foot for lumber a price to base any repairs necessary from rot upon the removal of the existing roof. This will need to be invoiced separately upon finalization of the project.
