• Pedestals shall be fabricated from 6063-T4 aluminum tube. Pedestal is heat treated to T6 condition after welding. Be designed for sustained 90 mph winds, appropriate gust factor and specified loading. For typical loading assume two pedestrian units, clamshell mounted, each 1.4 square feet and 25 pounds. • Come with four (4) anchor bolts including nuts, lock washers and eight (8) shims. • Come with a 4.52” I.D. cast aluminum pole top cap • Come with a cast aluminum decorative clam shell base, that is Valmont Industries “Huntington” base or Union Metal “Columbian” base. • Come with a fluted pole shaft (16 sharp flute) that has a combined straight-tapered design and a one-piece construction with no longitudinal or circumferential welds except for the weld needed to attach the pole base. Dimensions shall be 6” bottom diameter, 4.5” top diameter and 10.7’ in length. • Have a pole base telescoping the pole shaft. The base shall be welded to the pole shaft by 2 circumferential welds: one on the outside of the pole at the base top and one on the inside of the base at the pole bottom.