1. Pressure wash structure with hot water and pressure of at least 5,000 PSI per AMPP SSPC-SP1 specifications. 2. Remove all previous coatings using abrasive spot blasting per AMPP SSPCSP6 specifications. 3. Use hand tools and power tools to remove rust of structure areas per AMPP SSPC-SP2 and AMPP SSPC-SP3 specifications. 4. Replace any and all bolts needed as a result of pressure washing, abrasive blasting and tooling. 5. Prime structure with 2-part epoxy coating. 6. Apply a finish coat of poly-siloxane paint. 7. Tarp entire structural area to capture and contain debris associated with spot blasting and to prevent paint splatter and overspray on fiberglass slide components, concrete, and other areas. 8. Clean all areas at the conclusion of the project.
