The following specification is for two (2) complete pickup truck installations on 2025 Ford F250 Super Duty 4x4. The vehicles will be supplied to the body builder by the City of Upper Arlington. Bid must include the cost for all materials and labor for two (2) complete installation of the safety lighting, lift gate, arrow board and the listed specifications to provide complete usable truck. Lighting Features Whelan 54” EDGE Light Bar or Equal Amber/White Strobe Heads with steady burn white feature, CCP9 in-cab controller. The light bar must be installed on the cab to ensure 360-degree visibility. Whelan TLI12-4 corner strobes (or equal) wired through a CEM 16 expansion module. Two strobes must be mounted on the front grill and two on the rear bed posts. All Components shall be wired to a control panel inside the cab Arrow Board K&K Systems Model#AV253060 or Equal Must meet MUTCD Requirements for intermediate-speed facilities and for maintenance or mobile operations on high-speed roadways. Super-bright LED technology 100,000-hour rating 360 Degree visors protect LED modules Minimum size 1500 x 750 mm (60 x 30 in), minimum legibility distance 1.2 km (3/4 mi), and minimum 13 elements. 25 Lamp configurations with 8 to 13 functions Independent module operation Auto dimming capability 30-40 flash rate Controller wired inside the truck Extruded aluminum frame Single Aluminum Backskin Powder coat finish Leg Extensions for Low Profile Mount: Model: M-LE-LP or equal 90 Degree Auto Raise/Lower: Model:M-90-A or equal To be installed flush with the cab of the truck Liftgate Galvanized 1500# Capacity – 38” Extruded Aluminum Platform Include mounting for a Ford F250 Galvanized Frame Dual Hydraulic Cylinder Lift 4-light LED Kit Recessed Remote Control with Time-Out Features Fully Enclosed Hydraulic System Virtually Maintenance Free Components Relocate Harness and 7-Way RV Receptacle 2 Year Warranty Rear Camera The 2025 Ford F250 4x4 will have a backup camera installed by the Ford factory. The vendor will be required to re-install this item to the lift gate to ensure full functionality. Reinstallation shall seamlessly integrate with the factory display and other system settings.
