Specifications include, but are not limited to: Each hoop house kit must meet the following minimum specifications: 1.3.1.1. Dimensions 1.3.1.1.1. The hoop house kit when assembled must create a hoop house that is 30’ wide by 144’ long with a sidewall height of 4’ and a bow spacing of 4’. 1.3.1.2. Must have a minimum wind load rating of 90 miles per hour for over a 3 second gust. 1.3.1.3. Must have a minimum snow load rating of 10 pounds per square foot of ground snow. 1.3.1.4. Must include steel end wall kits for the hoop house. The steel end wall kits must include all hardware needed to install and fasten. 1.3.1.5. Must include 4 year, 6 mil poly covering to cover both the structure and end walls in their entirety. Poly covering must be doubled to create a double walled hoop house that works with the Inflation system outline in 1.2.1.11. 1.3.1.6. One roll of 3’ wide by 48’ long premium poly patch. 1.3.1.7. Locking system for attaching to ground/anchor point. 1.3.1.8. Two 8’ wide x 7’ high double slide doors that must include all tracks and hardware. 1.3.1.9. Exterior shade tarp capable of covering the entire hoop house. 1.3.1.10. Drop down side curtain system for the complete length of each side wall of the hoop house with a motorized crank system to operate drop down side curtains. The motorized crank system must be sufficient to operate the drop down side curtains. Both systems must include any other hardware needed to install the systems. 1.3.1.11. Inflation system which includes blower, mounting bracket, baffle, and any other hardware need to install. Must be capable of inflating and maintaining the inflation of the 4 year, 6mil poly covering outlined in 1.2.1.5. 1.3.1.12. Ventilation system utilizing horizontal air flow fans capable of moving a minimum of 1695 CFM. This system must include any other hardware needed to install the system...
