1. Metal Building a. Contractor shall provide and construct a pre-engineered, pre-fabricated metal building with a minimum square footage of 4000 (approx.. 36’x115’) b. Building shall have 16’ eave height c. Roof shall be 2:12 pitch d. Symmetrical gables e. 115’ clear span f. Wall panels to be 26 ga, insulated, owner to pick color g. Roof panels to be 24 ga. standing seam, insulated, owner to pick color h. (5) 12’x14’ Non-insulated commercial grade garage doors with windows, color to match building i. (2) 36”x84” commercial grade steel insulated service doors with window j. Full cover trim on all doors, corners, edges, eaves, etc., owner to pick color. k. 6 in. seamless commercial grade gutters, (4) 4 in. x 4 in. roof downspouts connected to drainage system Contractor shall prepare the site with concrete pad and electric service conduit. Coordination will be required between the owner and contractor for tie-in of new building to existing utilities. 2. Building Electric a. Contractor shall include interior and exterior lighting for the building in accordance with NEC, Ohio Building Code and applicable codes and regulations. b. All wiring shall be copper metal in EMT. c. Contractor shall provide electrical drawings prepared by a Professional Engineer registered in Ohio and obtain an electrical permit. d. Contractor shall include (1) MDP 200-amp 1-phase 42-space surface-mounted panel with 200-amp main breaker mounted to interior wall panel and conductors, grounds. e. Include switches, other 3. Site Preparation: a. Grading of building pad and surrounding area. Approximately 20,000 SF b. 6” concrete floor, 4000 lbs strength, reinforced on 4” stone base. c. 6” concrete approach slabs, reinforced, 20 ft. x 5 ft. centered at each garage door, slope at 2% min away from building. d. 4” concrete slab at each service door, 60 in. x 60 in.
