(1) Flooring: The current floor is a concrete slab. Some minor leveling may be required. The flooring material to be installed shall be nature stone flooring (any alternative material shall be approved by site representative prior to installation). The approximate square footage is 1500 Sq-ft. This includes two large rooms, two bathrooms, and an entryway. Application-appropriate trim molding is to be used for the finished edges of the flooring where it joins the walls. Application-appropriate transition trim is to be used for all finished edges around doorways and thresholds. Division of Wildlife will remove all existing flooring before installation of new flooring Comment by Mcdonough, Sean: Can this be specified? What kind of trim? (2) Rough framing and drywall: Currently there is a section of interior wall that has brick veneer installed. (Figure 8.) The contractor shall remove the brick veneer, rough frame any needed areas after the veneer removal, and install drywall over the area. Material behind brick veneer is plywood secured to 2 x 4 wood studs. There is also an area around an installed door that will need some minor rough framing completed and drywall installed (Figure 7.). The newly drywalled areas will be painted as part of section 3. (3) Painting: walls of the large classroom area and second large room will be painted with a satin interior Sherwin-Williams brand paint or comparable product. Paint color shall match existing paint color in entryway and bathrooms. (4) Base molding: After painting and flooring are completed, contractor shall installed 4 inch thermoplastic rubber base molding along the perimeter of both the classroom area and the large room adjacent to the classroom. Approximately 204 linear feet in total
