Specifications include, but are not limited to: 3.3.1 Item #1: Two (2) Kubota X1100 utility vehicles or equal 3.3.1.1 Engine shall be diesel 3.3.1.2 Engine shall have a displacement of at least 1,028 cc 3.3.1.3 Engine must produce at least 24 hp 3.3.1.4 Engine must be liquid cooled 3.3.1.5 Transmission must be automatic 3.3.1.6 Vehicle must be 2 wheel drive with selectable 4wd capability 3.3.1.7 Gear selector shall have H/L/N/PARK options or equivalent 3.3.1.8 Vehicle shall be equipped with engine block heater 3.3.1.9 Brakes shall be 4 wheel disc or wet-disc type 3.3.1.10 Bed box shall be at least 36.5 x 50.0 x 11.0 inches (92.7 x 127 x 27.94 cm) 3.3.1.11 Minimum ground clearance of at least 7 inches (17.78 cm) 3.3.1.12 Fuel tank must hold at least 7.0 gallons of fuel 3.3.1.13 Vehicle shall seat 2 persons with at least 2 point safety belt 3.3.1.14 Payload capacity must be at least 800 pounds 3.3.1.15 Vehicle must have a towing capacity of at least 1,200 pounds 3.3.1.16 Vehicle must have standard 2 inch receiver 3.3.1.17 Tires shall have 25x10-12 all-terrain type tires 3.3.1.18 Tires shall be mounted on stamped steel rims 3.3.1.19 Vehicle shall have a fully enclosed cab 3.3.1.20 Cab shall be equipped with heat and defrost 3.3.1.21 Vehicle shall have tip out type windshield 3.3.1.22 Vehicle shall be equipped with wiper and washer kit 3.3.1.23 Cargo box shall have tie downs 3.3.1.24 Vehicle shall have roof mounted strobe light 3.3.1.25 Vehicle shall have horn kit installed 3.3.1.26 Cargo box shall be either steel or composite type 3.3.2 Item #2: One (1) Commercial HD Front V – Plow Blade 3.3.2.1 Blade shall be minimum 70 inches wide and a maximum of 74 inches wide. 3.3.2.2 Plow blade shall be V type to allow snow to be directed to different sides. 3.3.2.3 Plow blade shall be compatible to operate as an attachment to Item #1 listed in 3.3.1. 3.3.3 Item #3: One (1) Salt Box and Spreader 3.3.3.1 Salt box shall be a minimum 8 cubic feet and maximum of 12 cubic feet in capacity. 3.3.3.2 Box shall incorporate material spreader to the rear of the machine. 3.3.3.3 Salt box and spreader unit shall be compatible to operate as an attachment to Item #1 listed in 3.3.1.