The U.S. Coast Guard is looking for sources which would be interested in performing DRYDOCK repairs for Coast Guard Cutter TACKLE (WYTL 65604).
USCGC TACKLE (WYTL 65604) is a 65 Foot Small Harbor Tug.
ANTICIPATED PERIOD OF PERFORMANCE: The performance period of this upcoming DRYDOCK is 21 October 2025 to 15 December 2025.
The scope of the acquisition is for the drydock repairs of various work items for the USCGC TACKLE. This work will include, but is not limited to:
Fire Prevention Requirements TYPE
Hull Plating, U/W Body, Inspect
Hull Plating, U/W Body, Ultrasonic Testing
Hull Plating, Freeboard, Ultrasonic Testing
U/W Body, Preserve, 100 percent
U/W Body, Preserve, Partial, Condition A
U/W Body, Preserve, Partial, Condition B
U/W Body, Preserve, Partial, Condition C
Hull Plating Freeboard, Preserve, Partial
Hull Plating Freeboard, Preserve, 100 Percent
Hull and Structural Plating, General, 10.2 lbs. Steel, Renew
Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew
Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew
Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew
Hull and Structural Plating, General, 7.5 lbs., 3/16 in. Steel Plate, Renew
Hull and Structural Plating, General, 7.65 lbs. Steel Plate, Renew
Hull And Structural Plating, General, Cracked Steel Welds, Repairs
Hull and Structural Plating, General, Degraded Weld, Steel, Repair
Appendages, U/W, Leak Test
Appendages, U/W, Internal, Preserve
Voids (Accessible, Weather Deck Exposed), Inspect
Tanks, MP Fuel Service, Clean and Inspect - Tender
Tanks, Potable Water, Clean and Inspect
Propulsion Shafting, Strain Gage Alignment, Inspect
Propulsion Shafting; Remove, Inspect, and Reinstall
Propulsion Shafting, Straighten
Propulsion Shaft Bearings, External, Check Clearances
Propulsion Shaft Bearings (External), Renew
Stern Tube Interior Surfaces, Preserve, 100 Percent
Propeller , Clean And Inspect
Propeller , Remove, Inspect, and Reinstall
Propeller, Minor Repairs and Reconditioning, Perform
Keel Coolers, Clean, Inspect and Hydro
Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean
Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean
Boiler Exhaust Stack Uptakes, Commercial Clean
Fathometer Transducer, Renew
Vent Ducts, Engine And Motor Room, All, Commercial Cleaning
Sea Valves and Waster Pieces, Overhaul Or Renew
Sea Strainers, Duplex, All Sizes, Overhaul
Hot Water Accumulator Tanks, Clean and Inspect
Compressed Air Receivers and System Valves, All, Clean, Inspect,
Hydro and Lift
Rudder Assembly, Remove, Inspect And Reinstall
Rudders, Preserve, 100 Percent
Rudder Stock Bearings Clearances, Check
Rudder Stock, Rebuild
Hull Fittings (Mooring and Towing), Inspect and Test
Boat Davit, Inspect and Service
Sewage Holding Tanks, Clean and Inspect
Grey Water Piping, Clean and Flush
Sewage Piping, Clean and Flush
Tanks (Sewage Holding), Preserve, Partial
Tanks, Potable Water, Preserve, Partial
Cathodic Protection, Zinc Anodes, Renew
Drydock
Temporary Services, Provide - Tender
Sea Trial Performance, Support, Provide
Bilges, Preserve
Deck Covering, Interior, Wet and Dry, Renew
Lead Dust, Clean
Ship Structures, Inspect for Presence of Lead-Based Paint
Lead-Based Paint and Asbestos-Containing Material, Perform Partial Abatement
Lead-Based Paint and Asbestos-Containing Material, Perform Spot Abatement
Lead-Based Paint, Perform Spot Abatement
Alarms, Halon Pre-discharge, Modify
Small Boat Cradle, Preserve
Cargo Hold Structural Repair
Frame Repair Crews Berthing
Multi-Cable Transit, Renew
Multi-Cable Transit Engine Room, Renew
Sewage System Piping, Renew
Emergency Lighting Fixtures, Replace
Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc….
Replies should be sent by 11 July 2025, 10:00 am Eastern Standard Time to: Iran.N.Walker@uscg.mil
Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a combined synopsis/solicitation will be posted on this website (https://www.sam.gov).
The NAICS Code is 336611. The small business size standard is less than 1300 employees.
Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, "Notice of Service-Disabled Veteran-Owned Small Business Set-Aside" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service-disabled veteran owned small businesses.
Additionally, regarding FAR 52.219-30 "Notice of Set A-Side For Women-Owned Small Business Concerns…": A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.
Primary Point of Contact:
Iran Walker,
Iran.N.Walker@uscg.mil
Phone: (757) 628-4563
