Airframe Requested Installations and Modifications Requested: 1 Install RSG Products Air Cond. System Single & Dual Condenser Blowers, mounted in R/H cargo Door area per STC# SH3509SW. **Include 3 position switch for Fwd. Blower Motors: Low, Off, High positions. 2 Install Dart Aerospace Full Length Skid Tube Wear plate Kit STC SR03889NY 3 Install Donaldson Engine Air Inlet Barrier Filter system for H125 B3, Dual Hydraulics STC# SR02560CH 4 Install Tail Boom lead Acid Battery Re-Location STC# SR00422NY utilizing Concorde RG350E Battery STC SR09130RC-D 5 Install Eurocopter Canada Cable Cutter System (WSPS) STC# SR03279NY 6 Install Right Hand Side Dual Cargo Mirrors STC# SR00457NY 7 Install L/H & R/H Door Closure/Hold Cylinder STC SH7351SW-D. 8 Install Co-Pilot Dual Flight Controls with Twist Grip H125 B3 only 9 Install Perform AS350 SB-71-00-07 Install of Engine Wash Kit to include bottle 10 Install Rear R/H & L/H Rear Cross tube mounted Maintenance Steps STC# SR00916NY 11 Install L/H & R/H Short Float/Access Steps STC# SH967NE 12 Paint helicopter and Granular Dry Hoppers to match; 3 color scheme; Include FKMCD Logo, will provide details on attachment. 13 Install Paint Dart Full length skid tubes Black 14 Install Cabin Interior Floor Covering, Rubberized Coin Mat Grey
