Specifications include, but are not limited to: GENERAL SPECIFICATIONS:1. Cutting edges must be cut in the lengths as specified herein.2. Cutting edge ends shall be cleanly cut.3. Cutting edges shall be uniformly through-hardened to Brinell hardness minimum of 400. Rating must be furnished with the bid.4. Lengths, as noted on the proposal, shall not vary more than + 1/8” specified in order to fit total moldboard length in various combinations.5. Bidder must specify delivery dates.GRADER CUTTING EDGES: 1. Size to be: Minimum wearing edge :"thick x 8" height x the designated length2. Curved.3. Painted.4. Standard AASHTO punching.5. If available, manufacturer’s name, trademark, or identifying part number to be stamped in the non-wear area for warranty claim abilities.6. Warranty replacement for breakage 2 for 1.