Specifications include, but are not limited to:The intent of this specification is to describe a 12’ straight reversible snow plow. The snow plow shall be suitable for mounting onto a Falls 26B or Monroe FLS26B type quick hitch on a 39,000 pound GVW single axle to 58,000 pound GVW tandem axle rear-wheel-drive truck. The snow plow shall be of all steel fabrication, of rugged construction, and properly braced and reinforced. The snow plow shall be standard production of the latest model with standard accessories and in addition meet or exceed the following minimum specifications: COMPLY YES NOSPECIFICATION DEVIATIONS1.Coupling Device a. Designed to attach to Falls 26B or Monroe FLS26B truck hitch _____ _____ _____________________ b. Designed to support the operation and weight of the snowplow _____ _____ _____________________ c. Shall allow the snowplow to swivel freely to follow the contour of the road _____ _____ _____________________ d. 2" center pivot bolt _____ _____ _____________________ i. Falls style or equal with square plate steel head, that fits into Falls style or equal swivel plate, with a shaft running through the center of the head and welded on the top side so the transition from the head of the bolt to the shaft is completely square not rounded or tapered to insure a tight fit to the swivel plate and push frame _____ _____ _____________________ ii. Pivot bolt lock nut must be on the back side of the push frame to allow for access to the nut from the back of the plow, must be top-lock design lock nut, lock washers will not be allowed
