The contractor will be required to provide the following to achieve the objective of this project: 1. Front Loading Chassis a. Rated capacity to match GVWR of loaded packer unit b. Cab to include air conditioning, cloth seat, AM/FM radio and heated power-controlled mirrors c. Auxiliary self-steering pusher axle, if necessary to meet GVWR d. Allison 4500 RDS automatic transmission with PTO provision e. Axle ratios suitable for collection and highway speeds f. Wet sleeved engine not less than 350HP g. Tilt/telescoping steering wheel options h. Complete set of manufacturers specifications for truck chassis 2. Front Loading Compaction Unit a. 40 cubic yard total capacity (combined body & hopper capacity) b. Fork-type front loading with 8,000 lb lift capacity c. Suitable to handle all current manufactured containers designed for front loaders d. Rear and side mounted monitoring camera with heated lens and automatic shutter e. Full ejection type unloading, hoist dumping not acceptable f. Transmission PTO driven hydraulic pump to automatically shut down at 35 MPH g. Clean out doors h. Total overall length not to exceed 35 ft with lift arms in tucked position i. Cab shield and safety protection j. Hydraulically actuated sliding top door to cover hopper for traveling k. LED lighting l. LED warning lights and backup alarm m. Low hydraulic fluid warning n. Complete set of manufacturers specifications for packer unit...
