Specifications include, but are not limited to: Engine: 3-cylinder diesel, minimum net 24.8 hp Operating Weight: Minimum operating weight of 3900 pounds exclusive of tire ballast and with all required specifications listed below. Transmission: hydrostatic Steering: hydraulic type articulated steering Drive Train: Shall have an infinitely variable hydrostatic transmission powering four independent series-connected drive motors Brake: Service brakes shall operation in water, mud, snow, or other adverse conditions without encountering brake fade. Parking brake shall be spring applied, pressure release multi-disk brake on rear drive motors. Tires: Size to be 23X8.5-12, 8 PR (turf type) Loader: Heavy duty 54” material bucket Bolt on type cutting edges mounted on bucket. Ground to dump pin height of 85.4”. Bucket breakout force of 3092 lbs Hydraulic System: System shall have standard flow capable of providing 12.1 gpm to operate bucket, lift arm and attachment. Cooling System: Pressurized liquid cooling system with thermostat. Radiator shall be filled with manufacturer's approved anti-freeze solution that provides adequate protection to -34 degrees F. Instrumentation: Unit shall have gauges that include: engine coolant temperature and fuel level. Unit shall have indicators that include: armrest position, hydraulic lock, parking brake and seat belt. Data Display Screen shall include: battery voltage, engine rpm, engine preheat, hourmeter, and service codes and warnings
