Specifications include, but are not limited to: The Contractor shall provide a detailed cost per location. Trees physically marked with two (2) ribbons shall be cut. Tree removal specifications shall include removing the tree without damaging surround areas as specified below. Trees that do not require stump grinding shall be cut no higher than eight (8) inches above existing grade surface. Unless specified, the Contractor shall remove all associated debris from the site. Trees physically marked with one (1) ribbon shall be trimmed. Trimming specifications shall include cutting all broken, twisted, unsafely low hanging or dead limbs greater than two (2) inches in diameter. All cuts shall be close to the sister limb or trunk in a clean cut manner. Unless specified, the Contractor shall remove all associated debris from the site. The Contractor, where required shall stump grind. Stump grind specifications shall include grinding the stump(s) at a minimum of eight (8) inches below existing grade. Any and all roots associated shall be grinded and filled to match existing grade at the location. All debris resulting from the stump grinding shall be removed. The Contractor shall supply topsoil for backfilling the same day that the stump has been grinded to ensure public safety