Specifications include, but are not limited to: ITEM 1: NON-AUTOPSY BLOOD AND URINE SPECIMEN COLLECTION KIT: (EACH KIT MUST CONSIST OF THE FOLLOWING COMPONENTS) 1 ea. Kit Box, 5” L x 3-3/4” W x 2-1/2” H, sealed at awarded Vendor’s site with a tamper-evident kit integrity seal. Each shipping container must be approved for transport or shipping biological or hazardous agents. Note: A) Biohazard Label, affixed to top of kit box. B) Address Label, custom printed in Blue and affixed to top of kit box. (See specifications for address label below) 1 ea. Instruction Sheet/FDA Insert (for non-autopsy), Size: 5-1/2” x 8-1/2”. Printed in black ink on blue stock, and then folded into quarters to fit in kit box. (Custom form printed front and back with customers specified text.) Form to be supplied to Vendor after bid award. 1 ea. Request for Toxicological Analysis Form, Size: 5-1/2” x 8-1/2”, Printed in Black ink on white stock then folded into quarters to fit in kit box. (Custom form printed front and back with customers specified text.) Form to be supplied to Vendor after bid award. 1 ea. Gray Foam Specimen Bottle Holder/Protector Note: Holes for 20ml Vials will be cut to a smaller Diameter to hold vials in place. 1 ea. 20ml Blood Vial, containing 0.4gms of Sodium Fluoride powder, with white plastic screw cap and a label printed in black affixed to bottle (with 20mil fill to Mark). (See sample of label for size, imprint and color.) 1 ea. 20ml “Other” Vial, with white plastic screw cap and a label printed and affixed to bottle (with 5ml Fill to Mark). (See sample of label for size, imprint and color.) 1 ea. Ziploc Bag, 8” x 8”, containing one liquid absorbing sheet. (For containment and absorption of fluids if specimen bottles should leak in transit). 1 ea. Kit Box Shipping Seal, for resealing kit box after specimen collection, printed in red on white void type stock. 3 ea. Seals, Vendor will add 3 each of customer supplied seals at no charge ITEM 2: AUTOPSY SPECIMEN COLLECTON KIT: (EACH KIT TO CONSIST OF THE FOLLOWING COMPNENTS) 1 ea. Kit Box, 6” L x 4-3/4” W x 2-1/2” H, sealed at awarded Vendors site with a tamper-evident kit integrity seal. Each shipping container must be approved for transport or shipping biological or hazardous agents. Note: A) Biohazard Label, affixed to top of kit box. B) Address Label, custom printed in Blue and affixed to top of kit box. (See specifications for address label below) 1 ea. Instruction Sheet/FDA Insert (for autopsy), 5-1/2” x 8-1/2”. Printed in black on blue stock, and then folded into quarters to fit in kit box. (Custom form printed front and back with NC specific text). Form to be supplied to Vendor after bid award. 1 ea. Request for Toxicological Analysis Form, 5-1/2” x 8-1/2”, printed in Black ink on white stock and folded into quarters to fit in kit box. (Custom form printed front and back with NC specific text.) Form to be supplied to Vendor after bid award. 1 ea. Gray Foam Specimen Bottle Holder/Protector Note: Holes for 20ml Vials will be cut to a smaller Diameter to hold vials in place. 1 ea. 10ml Peripheral Blood Vial, containing 0.4gms of Sodium Fluoride powder, with white plastic screw cap and a label printed in black affixed to bottle (with 20mil Fill to Mark). 1 ea. 20ml Aorta Blood Vial, containing 0.4gms of Sodium Fluoride powder, with white plastic screw cap and a label printed in black affixed to bottle (with 20ml Fill to Mark). 1 ea. 20ml “Other” Vial, with white plastic screw cap and a label printed in black affixed to bottle (with 5ml Fill to Mark). 1 ea. 120ml Liver Specimen Bottle, with white plastic screw top cap and a label printed in black affixed to bottle. 1 ea. Ziploc Bag, 8” x 8”, containing one liquid absorbing sheet. (For containment and absorption of fluids if specimen bottles should leak in transit. 1 ea. Kit Box Shipping Seal, for resealing kit box after specimen collection, printed in red on white void type stock.