1 Paper: 0.02 Coated Natural Kraft (CNK) Custom Kote (no substitute allowed) YES NO 2 Box size: 3.00000 x 2.250000 x 3.81250 (inches) YES NO 3 Caliper: 0.02 inch (20 pt). YES NO 4 Perforations on box sides (optional): 1/8 inch (0.0125 inch) using 2-point rule; 8 perforations randomly placed per side. Perforations must penetrate board 100% to allow for air movement without loss of soil from box. YES NO 5 Box Top Perforated: 1/16” tooth (cut) width with 1/32” spacing between tooth/cut, YES NO 6 Glue: H-2342P-WR (no substitute allowed) with superior waterresistance is required and shall be used. Glue shall be applied using a glue-wheel to obtain 100% edge to edge coverage. YES NO 7 Glue Technical Data Sheet: A technical data sheet on glue(s) shall be included in the bid response. The technical sheet shall specify waterresistance or vendor shall provide a statement regarding this characteristic / quality. YES NO 8 Glue Assist: 45-degree skip cut glue assists that cut 50% into the board are to be used at the glue seem to increase bond of glue to paper, enhance adhesiveness, and increase glue-to-board penetration. YES NO 9 Style: Hook locks and top-side seams that allow for easy closing designed as sample box. YES NO 10 Printing: Red line place under “FILL BOX TO THIS LINE” and one red arrow on each side pointing to red line. Printing of information required shall be on the plain-board side of box, not the white coated side. YES NO
