Specifications For Labor • Removal of old door and Installation of new fabricated HB 600 Bi-parting six section electrically operated bottom rolling hangar door re-using the old top tracks and old bottom tracks. • Adjustment as needed for proper operation. • Interface/shop drawings with stamped P.E. • Calculations report. . . electronic set: hard copies available upon request. • Provide Door installation instructions. • Provide Operation and maintenance manual Specifications For Materials • H - Series, Model HB600: Six-section (6), bi-parting,(northern stacked - "viewed from the exterior" please verify) electrically operated, bottom rolling hangar door to fit a clear opening 156'-2" wide by 27'-0" high. This hangar door requires 211'-0" total clearance inside face wall to wall with-in the hangar building. H-Series, Model HB600: Bottom Rolling Hangar Door Specification • Meets 115 MPH, 3 second gust, wind load, Exposure C. • Electrical rating: Incoming power for hangar door - • 480vac, 3 phase, 60 Hz. Interior - NEMA 4 • Door operation speed: 45 feet per minute.
