. . Glue Bleed around seams Seams not glued tight to corners, . Windows: Single window patch must be used to dover each window and provide readability of copy of the form to be inserted into envelope. Extremely glossy window material must NOT be used. Windows must be welded close and tight on all edges to prevent snagging during the insertion process. Must use patch material that meets USPS specifications. Window #1: LTL:1/2", BTB: 2-3/4", Size 2-3/4"W X 3/4" T Window #2: LTL: 4.25", BTB: 5/8", Size 4-3/4"W X 1-3/8"T Flap Throat: 1-3/8" Contoured flap, 3/8" Contoured throat GUM: Continuous Gum Line must be used on Flap EXECUTIVE STYLE NOT ACCEPTABLE Construction: Outside Side Seam, 9/16" side seams All seams should be glued and sealed all the way to the corners and top where laps are joined. These seams must be gummed and sealed close and tight. Corners must be square. Envelopes must not stick (excess glue) together which will create production problems. Past performance will be a factor in the award of this contract. Machine Use: Envelope must perform trouble-free on Pitney Bowes FPS SD 9 and Quadient DS- 1200 inserters. Packaging: Bulk Pack quantity: 2,000. 1,000 side by side Extra support materials must be used between layers to prevent curl and bowing of envelopes. Manufacturing Facility: Envelopes must be produced domestically Rejection Criteria: . Contoured Throat does not meet Industry Standard Tolerance of +/- .125" . Contoured Flap does not meet Industry Standard Tolerance of +/- 125" Window material extremely glossy Glue: o o o Random glue spots on either side of envelope, any of the above resulting in poor performance of envelope on listed equipment Envelope Curl and Bowing
