Chimney Tuckpointing • The Contractor shall refer to Chapter 6 of the Beaufort Historic Design Guidelines for Brickwork and Masonry. These guidelines are listed below. • Inspect and remove all loose, cracked, or deteriorated mortar from the chimney joints using appropriate hand tools to a depth of at least ¾ - inch or until sound mortar is reached. • Clean all joints of dust and debris to ensure proper bonding. • Repoint joints using mortar that matches the existing composition, color, texture, and profile. • Ensure the curing process meets the manufacturers recommendations. • Clean all masonry surfaces from smears and residue. • Should any of the brick become damaged during repairs, they shall be replaced with matching brick at the contractor’s expense. Flashing Replacement • Carefully remove and dispose of existing shingles surrounding chimneys and chimney flashing. • Install ice and water shield membrane around each chimney, extending a minimum of 24-inches beyond the flashing placement in all directions.
