Specifications include, but are not limited to: SPECIFICATIONS - Certificate of Titles (Form MVR-191) Form Dimensions: 8 ½” width x 11” length, printed on front and back Paper: Shall be no less than 28# ledger. To be cut sheet. Toner retention paper (laser printed title documents incorporates the ink into the paper allowing the retention of the toner and retaining the toner image so it cannot be scrapped, lifted with tape or flaked off). The fusion agent must not retard or impede the chemical sensitization contained in the paper. State Seal shall be reversed out in the center of the face of the title. Security/Control Numbers: Titles must bear consecutive numbering from starting from 10454401. Numbers shall be in red. (See penetrating Numbering Description). Guaranteed no missing numbers. No overrun or under run allowed. Security Features Required – NOTE- Location of features on the documents will be disclosed after the bid is awarded. Thermochromic Inks: These inks are heat reactive colors which shift from one color to another, or to a colorless (blank) image when exposed to a moderate increase in temperature. Color reaction must be prompt and revert quickly when the heat source is removed. The conversion rate is dependent on color, heat source, paper type, ink film thickness, and the surface on which the paper is resting. Primary activation is by touching or rubbing the printed image with a finger. This feature must not be capable of being duplicated by photocopying. These inks must be compatible with laser printing. Fusing temperature must not have a permanent impact on feature performance.
