Specifications include, but are not limited to: Greenlight Community Broadband (“Greenlight”) operates a municipally owned Fiber-to-the-Premises (FTTP) network serving more than 10,000 customers in Wilson, North Carolina and surrounding areas. Greenlight intends to enter into a contract with a qualified Contractor to furnish fiber optic cable and related materials required for an expansion of its FTTP network; 2.1 Fiber Optic Cable: Required fiber optic cable consists of both outdoor, loose buffer tube cable and ADSS cable in varying strand counts. All fiber shall be singlemode meeting or exceeding ITU G.652.D performance standards.; Cable shall be delivered on non-returnable wooden reels. Cable shall be provided on as few reels of contiguous cable as possible. If the full quantity of a particular cable requires more than a single reel, the quantity for each partial reel shall be coordinated with Greenlight in advance.; 2.1.1 Outdoor Loose Buffer Tube Cable: The outdoor loose buffer tube cable shall be gel-free with a single Jacket designed for outside plant applications, designed for installation in duct systems or lashed to aerial messenger wire, and have a UVresistant outer jacket. Fiber optic cable shall meet ANSI/ICEA S-87-640 and Telcordia GR-20 and shall be RDUP PE-90 listed. OSP loose tube cable will be provided in the below fiber cable varieties.; Item 2.1.1a: 12-Strand Outdoor Loose Buffer Tube Fiber Cable: 0.39-inch outer diameter; 1 buffer tube, 12 fibers per tube; Installation Minimum Bend Radius: 3.9 inches; Maximum tensile load: 600 lbs.; Shall be AFL Gel-Free Non-Armored OSP Loose Tube (LE Series Gel-Free SJ) LE0129C5101N1D, or approved equivalent; Item 2.1.1.b: 24-Strand Outdoor Loose Buffer Tube Fiber Cable: 0.39-inche outer diameter; 1 Buffer tube, 12 Fibers per tube; Installation Minimum Bend Radius: 3.9 inches; Maximum tensile load: 600 lbs.; Shall be AFL Gel-Free Non-Armored OSP Loose Tube (LE Series Gel-Free SJ) LE0249C5101N1D, or approved equivalent; 2.1.2 ADSS Loose Buffer Tube Cable (Short Span, Single Jacket): The ADSS loose buffer tuber cable shall meet the requirements of the IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines (IEEE 1222-2019). Specified cables shall support pole-to-pole span lengths up to 1,100 feet and have a single jacket design. All cables shall have a gel-filled, loose buffer tube design.; Item 2.1.2a: 12-Strand ADSS Fiber Cable: 0.425-inch outer diameter; Single buffer tube, 12 fibers per tube; Maximum rated cable load: 539 lbs.; Shall be AFL Flex-Span ADSS Fiber Optic Cable AE0129C520A08, or approved equivalent; Item 2.1.2b: 24-Strand ADSS Fiber Cable: 0.425-inch outer diameter; Two buffer tubes, 12 Fibers per tube; Maximum rated cable load: 539 lbs.; Shall be AFL Flex-Span ADSS Fiber Optic Cable AE0249C520A08, or approved equivalent; Item 2.1.2c: 48-Strand ADSS Fiber Cable: 0.425-inch outer diameter; Four buffer tubes, 12 fibers per tube; Maximum rated cable load: 539 lbs.; Minimum supported span length (NESC Medium Loading with 1.5% sag): 375 ft.; Shall be AFL Flex-Span ADSS Fiber Optic Cable AE0489C520A08, or approved equivalent
