The Contractor shall provide a proposal for the disposal of old system(s) and the furnishing and installation of a new cellular-enabled fire alarm system. This includes all associated equipment, devices, and hardware, such as but not limited to smoke detectors, animal friendly low frequency sounders, red or amber strobes, pull stations, key pads, fire alarm control panel(s) (FACP), transmitters, cellular communicators, antenna, back up batteries, wire, power box, HVAC shutdown integration, cover plates, signage, Knox box, and any other necessary components. • New devices shall be weather resistant and protected, depending on the location. • The Contractor shall install a 6”x6” post near the front entry gate with a Knox box securely attached. • The Contractor shall furnish new ceiling tiles for the new devices, if necessary. • All devices mounted to the wall shall be securely fastened, with all wiring enclosed in conduit and installed with no voids or gaps. • The Contractor shall include submittals of equipment to be used. Please provide make, model and serial number along with any warranty information per device. Preferred manufacture is Honeywell or an affiliated brand.
