Specifications include, but are not limited to: (A) Installation of 49 Verkada Cameras (5mp, already purchased). (B) Installation of new conduit “ruggedized” to 54 Verkada Camera locations (48 new cameras and 6 existing IP cameras) determined during the walk through held on January 31, 2024. Category 6 ethernet cable will be installed from each of the 54 camera locations to the Control Center of the jail. The conduit will be installed along the ceiling via the best, most secure routes possible. The six existing BNC Verkada camera locations will have new Category 6 ethernet jacks installed and terminated at the camera locations by vendor. (C) Vendor will provide all Certified Category 6 Ethernet cable, Certified Category 6 Jacks and/or mod plugs for the 49 cables, all conduit, (D) Vendor will provide and install (1) Floor Mount Cabinet 19U (28” deep) and (2) 48-port patch panels in the Control Room. Data Cabling (referenced above) will be terminated and tested on the patch panel by vendor. (E) Verkada Viewing Stations will be mounted above the windows in the Control Room. Vendor will provide and mount: (2) Sanus VLT16 Ultra Slim Low Profile TV Mount for $0”-85” TV’s with a 10 degree tilt, and (2) 55” 4K UHD LED LCD MONITOR, IPS Panel, MVA Technology, and V-by-One Interface, 16:9 (F) Installation and configuration of 2 Verkada Access Control Door and Door Hardware (on 2 doors in Magistrates office), associated access control cables, and Verkada Access Control Device. Vendor will also supply and install a Door release button to allow Magistrate to open door and let people in after hours. Vendor will supply any required equipment to complete electrified door and motion sensor installation, and Verkada Access Control Pad.
