Specifications include, but are not limited to: 2.1 CHASSIS: Is defined as the entire vehicle as produced by the factory, including but not limited to, the cab, frame, power plant, drive line, suspension, axles and wheels. Chassis shall be warranted for a minimum of three (3) years, except for frame (see Section 2.2 below). 2.2 FRAME: Is defined as the primary chassis member comprised of rail elements, cross members, (gussets and reinforcements if required) which provides a mounting place for suspension, steering, power train components, the cab and body, and also supports all loads. Frame shall be warranted for the life cycle of the vehicle as stated in the Intent Section of this specification. 2.3 ENGINE: The entire engine-assembly shall be warranted for a minimum of five (5) years, 100% parts and labor, with no miles or hours limitations. Engine warranty shall include, but not be limited to: turbo charger, charge air cooler and associated connections, intake and exhaust manifolds, fuel pump, fuel injector assemblies, fuel lines, crankshaft, camshafts, flywheel, water pump, and engine electronics including wiring harness, connectors, modules and controls. 2.4 ENGINE ACCESSORIES: All engine accessories shall be covered for a minimum of three (3) years, 100% parts and labor, with no miles or hours limitations. Warranty shall include, but not be limited to: Air compressor, power steering pump, thermostat(s) and fan drive.