SCOPE OF WORK: Heat Pump Installation The contractor shall: 1. Perform Manual J or equivalent load calculations for each location. 2. Decommission and removal of four of the existing systems. 3. Provide indoor and outdoor heat pump units sized to actual heating and cooling load. 4. Install indoor units, condensate management, and controls. 5. Install outdoor units on pads or brackets at side or rear of building. 6. Install new insulated refrigerant line sets. 7. Commission the entire system and provide staff training. 8. Provide warranties: 10-year compressor, 10-year parts, 1-year labor. 9. For the 3 Owens Road Green Room location. heat pump #3, the return ducting location needs to be discussed and will require moving to a lower location SCOPE OF WORK: Electrical Work The contractor shall: 1. Inspect existing electrical service and panel capacity. 2. Install dedicated circuits and breakers for each heat pump system. 3. Install disconnect switches within sight of each condenser. 4. Provide all conduit, wiring, grounding, and labeling. 5. Perform load testing. 6. Have an approved electrical inspection/certification upon completion.
