FURNISH & INSTALL WASHERS & DRYERS AT THE CDC PART 1 - GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall furnish and install laundry equipment. These system shall include top load washer and single chassis dryer. B. References: 1. Standards referenced in this Section are listed below: 2. American National Standards Institute, (ANSI). 3. Factory Mutual, (FM). 4. Institute of Electrical and Electronic OWNERs, (IEEE). 5. National Electrical Code, (NEC). 6. National Electrical Manufacturers Association, (NEMA). 7. Underwriters' Laboratories, Inc., (UL). PART 2 – PRODUCTS 2.1 Tumble Dryer – 30 LB. Capacity A. Quantity: four (4) B. Automatic laundry dryer for processing water-washed linen items C. SYSTEM DESCRIPTION 1. DESIGN REQUIREMENTS: a. Dry weight capacity: lb. 30 2. Cylinder volume: 9.6 cubic feet 3. Construction: a. Heavy duty embossed steel with e-coat and baked enamel powder paint 4. Input voltage: a. B : 100-120 / 50-60 / 1 b. X : 200-240 / 50-60 / 1-3 c. N : 440-480 / 50-60 / 3 5. Heat source: Gas, natural, 1/2 NPT 6. Overall width: in. [mm] 27.9 [710] nominal 7. Overall height: in. [mm] 63.9 [1,625] nominal 8. Overall depth: in. [mm] 45.5 [1,155] nominal 9. Exhaust size: Inch [mm] 6.0 [150] 10. Control system: Dual timers for drying and cooldown, along with variable temperature settings. 11. Stainless steel door: High grade stainless steel door with 7/8 in. [22 mm] rubber gasket and two point heavy duty hinge...
