Fort Hood Range Operations wants to purchase a Flex Wing Cutter with the following specifications: 50-160 GEARBOX HORSEPOWER 540 RPM 160HP DIVIDER 130 HP CENTER and WINGS GEARBOX LUBRICATION GEAR LUBE 80-90W GEARBOX OIL CAPACITY Splitter: 3.5 pints Center deck and wings 6 pints Cutting capacity: 2 1/2inches /Machine weight: Total weight: 3,730 lbs /Tongue weight: 1,240 lbs Blade tip speed @ 540RPM Center blades 15,268 FPM Wing blades 15,000 fpm Hitch type: Standard Clevis Cutting width: 1-0ft/ Overall width 15ft-11 1/2inches / Minimum transport width 7ft-11 3/4inches Overall length:15ft-6inches with center deck raised/Deck height: 12inches /Cutting height 2-14inches Lift hydraulics: 3 x 8inches hydraulic cylinder hoses, fittings and stroke control spacers Wing folding hydraulics: 2 1/2 x 12inches hydraulic cylinders and hose Wing flex while operating: Max down 20 degrees / Wing transport protection: Wing transport Locks Deck material thickness:10-gauge (3.4 mm) minimum/ Side skirt thickness:1/4inch Skid shoes: Wing deck skid shoes AR400 Center deck skid shoes AR400 Blades - 6 (2 per carrier)/1/2 x 4inches heat-treated Free-swinging alloy with uplift Blade overlap :6inch/ Blade bolt: Keyed with hardened flat washer and lock nut Stump jumper/blade holder 3/16inch Thick round dish shaped pan, with 1 x 4inch blade bar Front and rear guards: Single row chain/ Input driveline 540 rpm Cat. 6 with constant velocity u-joint /Intermediate driveline Standard - Category 5 with slip-clutch Wing drivelines: Standard- Category 4 with slip-clutch/ Wheel option 6 x 21inch Laminated tires /Number of wheels: 6 - Wheel option: Four on transport axle and one on each wing Transport axle: Spring- cushioned on center transport axle Hubs Cast iron five- bolt hubs with tapered roller bearings and 1 3/4inch shafts Deck rings Included Submissions must include the specification sheet and a picture of the exact item the vendor is offering in their bid for this solicitation
