To Contractors of Bid:
The 2025 Parry Street Reconstruction Project consists of a full reconstruction of the existing Parry Street city
block located in the City of Rome, NY. Parry Street is located between East Bloomfield Street and Dean Street.
The scope of work consists of complete demolition and excavation of the existing roadway, curbing, sidewalks,
driveways, gravel, and other features located within the City of Rome Right of Way. Work will be performed to
remove and replace existing water and sanitary sewer services to each of the residential homes located along
Parry Street. Water service replacements will involve live corporation taps on the existing water main and
abandonment of the existing corporations. There is one location along the existing sanitary sewer main which
needs to have an approximately 5 Foot length of pipe repair performed. The approximate location of this repair
area is at Station 3+00. It should be noted that the sanitary sewer main at this location is at a relatively deep
depth of roughly 12 Feet below roadway elevation.
Reconstruction of Parry Street will also involve the machine slip forming of concrete curb throughout the entire
length of the project. Roadway profile will be constructed as shown on the contract drawings. Concrete
sidewalks will be constructed along both East and West sides of Parry Street to service the residential homes
and pedestrians in this area. Driveways will be constructed. Tree plantings will be installed as well as sod turf
establishment throughout the city block.
The contractor will be in control of the Maintenance and Protection of both pedestrian and vehicular traffic
along Parry Street during construction. Contractor will also be in control of the Survey and Layout Operations
as required to successfully construct the project.
This Scope of Work Summary in not an all-inclusive description of the work to be performed but rather a highlevel
overview of the major components of the construction project. All work will be performed according to
the contract drawings, specifications, and to the satisfaction of the Project Engineer.
