Specifications include, but are not limited to: 1. Geotechnical Services: Provide a full range of geotechnical, soils investigation, testing and analysis services in support of new construction developments or retrofit/repair of existing facilities or structures. Conduct site & subsurface geotechnical investigations, site characterization, and geotechnical foundation design recommendations. Soils investigation may include, but not limited to, a mix of the following geotechnical engineering services: • Site explorations including drilling borings and cone penetrometer tests (CPTs) • Foundation alternatives analyses • Embankment and excavation slope stability evaluations • Slope repair recommendations • Excavation, shoring, and dewatering recommendations • Soil improvement/remediation recommendations • Settlement analysis and monitoring • Seismic fault investigations • Anchor load tests • Evaluation of soil bearing capacity • Pile drivability and capacity analyses • Site grading specifications • Probabilistic and deterministic seismic hazard evaluations • Liquefaction potential studies • Selection of seismic design parameters • Stability analyses of slopes, channels and excavations • Pile lateral and axial capacity curves • Cantilevered, anchored, and braced sheet pile analyses • Retaining and flood walls analyses • Seepage analyses • Dewatering design 2. Materials Testing: Provide a full range of Construction Materials Testing and Inspection Services including testing of soils and other building materials during construction of a wide variety projects. Inspection and Materials Testing Services may include, but not limited to: Inspection Services/Special Inspections • Concrete: Batch Plant, Pre-stress/Post-Tension, Concrete Strength Testing • Structural Steel: Bolting, Erection, Welding, Welding Qualifications • Masonry and Roofing • Field and Plant Asphalt Concrete Materials Testing • Aggregate, Concrete & Masonry: Beams, Blocks, Cubes, Cylinders, Grout/Mortar, Prisms, Shotcrete/Gunite • Reinforcing and Structural Steel: Bend & Tensile • Non-Destructive Testing (NDT): Dye Penetrant, Magnetic Particle, Ultrasonic Radiographic, in-Place Concrete Soundness, and Rebar detection in Concrete