ITEM #1 TWO POST LIFT, ROTARY SPOA10 This specification shall describe a Rotary SPOA10, or equal, surface mounted two post lift rated at 10,000 lb. capacity. The lift shall be installed with all the proper shim kits and shall be installed by a Rotary authorized installer. ITEM #2 TWO POST LIFT, ROTARY SPO12-TA This specification shall describe a Rotary SPO12-TA, or equal, surface mounted two post lift rated at 12,000 lb. capacity. The lift shall be installed with all the proper shim kits and shall be installed by a Rotary authorized installer. ITEM #3 TWO POST LIFT, ROTARY SPO20 This specification shall describe a Rotary SPO20, or equal, surface mounted two post lift rated at 20,000 lb. capacity. The lift shall be installed with all the proper shim kits and shall be installed by a Rotary authorized installer. ITEM #4 EBRIGHT MOBILE LIFTING SYSTEM, STERTIL KONI ST1085-2FWA It is the intent of this specification is to establish the minimum standards of quality and performance for portable mobile column lifts which will be used to lift a variety of vehicles including Trucks, Buses, Passenger Vehicles, Fork Lifts and other general service vehicles. This specification shall describe a mobile column surface mounted, wheel engaging lifting system designed to elevate vehicles for the purpose of inspection and maintenance. One lifting system shall consist of four electric-hydraulic mobile columns sustaining 74,000 lb. capacities (18,500 lbs. per mobile column). Mobile columns may be added, removed or changed out. All mobile columns shall operate synchronously from any one of the lifting units by means of a control interface. The control system shall have replaceable printed circuit boards equipped with quick connect electrical couplers. The mobile columns shall be battery operated with a DC charging system built into each column for easy recharge.
