• Flat Repair Loose – Light Truck and Front Farm (Tire not on vehicle) To be picked up at any one of our facilities as requested and returned to the same location. Maximum turnaround time for this process is forty-eight (48) hours. No plug repairs will be allowed. All repairs must be in accordance with RMA (Rubber Manufacturers Association) accepted guidelines. No external repair units on over the road speed rated tires will be allowed. Loose repairs are not to be done at our facilities, but at the successful bidder’s facility. Dismount from rim/wheel, repair injury from inside with proper size and type repair unit, inspect rim/wheel, remount tire and inflate to proper air pressure. • Flat Repair Loose – Large Truck and Bus (On/Off Vehicle/Equipment) Vendor will be notified of size/type of tire and location of vehicle/equipment. No plug repairs allowed. All repairs must be in accordance with RMA accepted guidelines. No external repair units on over the road speed rated tires will be allowed. Remove from vehicle/equipment, dismount from rim/wheel, repair injury from inside with proper size and type repair unit, inspect rim/wheel, remount tire on rim/wheel to proper air pressure, replace on vehicle/equipment. • Mount and Dismount Loose Tires Dismount old tire from rim/wheel. Mount new tire or repaired tire on rim/wheel, inflate tire in accordance with the proper industry standard. • Mount and Dismount On/Off Vehicle/Equipment Remove tire/wheel from vehicle, dismount tire from rim/wheel, install new tire or repaired tire on rim/wheel, inflate tire in accordance with the proper industry standard, install on vehicle/equipment.
