SPECIFICATIONS FOR AMBULANCE POWER STRETCHER LOADING AND FASTENING SYSTEMS NJSEA is seeking five (5) Power Stretcher Loading and Fastening Systems designed to lift, load and unload patients. Specifically, the NJSEA is seeking FERNO POWER F2 loading systems or their equivalent. The Loading and Fastening System must be compatible with the supplied Power Ambulance Stretcher. SAFETY REQUIREMENTS: The Ambulance Power Stretcher Loading and Fastening Systems shall meet or exceed the following independent certifications: IP Rating = IP56 (dust and water ingress protection rating) IEC 60601-1-2 (internationally recognized standard for electromagnetic compatibility (EMC) of medical electrical equipment and medical electrical systems) KKK-A-1822 (federal specification outlining the minimum requirements for ambulance construction and performance) SAE J3027 (dynamic crash test standard) EQUIPMENT SPECIFICATIONS: The Loading and Fastening Systems must meet or exceed the following specifications: Length: Maximum Overall Length 95” Width: Maximum Width: 24.5” Weight: Maximum Weight: 211 lb. Maximum Lift Capacity: 700 lb. (318kg) Load Height: Minimum of 22” and maximum of 36” The Ambulance Power Stretcher Loading and Fastening Systems shall all include the following standard features: 1. Lifting arms 2. Head end lock LED indicators 3. Control panel 4. Cot release handles 5. Linear transfer system 6. Charging system SPECIFICATIONS FOR POWER AMBULANCE STRETCHERS NJSEA is seeking fourteen (14) Power Ambulance Stretchers that each consist of a platform, including a mattress, mounted on a wheeled, retractable X-frame that is designed to support and transport a maximum weight of 700 lbs. Specifically, the NJSEA is seeking FERNO POWER X2 Ambulance Cots or the equivalent. The stretcher is intended to transport a patient, primarily within an ambulance, to a healthcare facility. The Power Ambulance Stretchers must be compatible with the supplied Ambulance Power Stretcher Loading and Fastening Systems.
