Specifications include, but are not limited to: 1. CLASS A WINTER SHIRT: Material: hamburger woolen 333 P&F 3-ply, 55% Dacron, 45% wool, police & fire shade, long sleeve. Style: regulation police long sleeve shirt with shoulder straps and metal eyelet bade tab. Five permanently sewn-in military creases. Yoke to be center pointed for comfort and to be lined with 65% polyester and 35% cotton of coordinating color. Seven button front with vertical button holes. Button holes are to be extra heavy duty, approximately 50 stitches per inch. Center placket is to be approximately 1 3/8 inches wide and to be lined with fusible Pellon. All collars and cuffs are to be 1/4-inch top stitched and all seams are to have no less than 10 stitches per inch. All parts of the shift to be die-cut and creased to insure uniformity of shape and size. Badge tab shall be lined with fusible Pellon and two metal eyelets approximately 1-inch-wide and 2 inches long and to be sewn all the way around. All seams to have reinforcing tack stitching of no less than 3 stitches at the beginning and end of each seam. Construction: the collars and cuffs are to be 1/4" top stitched and all seams are to have no less than 10 stitches per inch. All parts of the shirts to be computer cut and mirrored to insure uniformity of shape and size. All seams to have reinforcing tack stitching of no less than 3 stitches at the beginning and end of each seam. Collar: to be stand-up style. Collar to have permanently fused shrink proof 100% cotton interlining. Extra heavy grade, collar to be approximately 3 inches long. Collar stays to be 1/2-inch-wide and 3 inches long made of mylar. Collar stays to be lined with 65% polyester and 35% cotton. Stitched in such a manner so that the stay reaches the tip of the collar. Sleeve: to have reinforced elbows, reinforcement to be one piece construction and to be double stitched at opening. Reinforcement to be approximately 6 3/4 inches at widest point and to vary depending on shirt size and is to be sewn into the permanently fused shrink proof 100% cotton interlining, extra heavy grade. Pockets: pockets to be pleated approximately 5 7/8 inches deep and 5 1/4 inches wide with military creases sewn through pleat. Pockets to have eyelets to accept metal buttons with retaining pin. Pocket flaps are to be scalloped style with velcro on each corner. Flaps are to have fused shrink proof 100% cotton interlining, extra heavy grade. Left pocket only to have 1 1/2-inch pencil division
