2.1 COMMERCIAL WASHERS - Quantity: Eight (8) - Model or Approved Equal: Pellerin Milnor Corporation Rigid-Mount Washer/Extractor, Model #36026 V5J - Minimum Required Features: • Rigid-mount construction • EP Plus programmable control panel • 60-lb minimum load capacity • Stainless steel inner wash cylinder and outer shell • Fully programmable/customizable wash cycles • High-speed extraction to reduce drying time 2.2 COMMERCIAL DRYERS Quantity: Eight (8) Model or Approved Equal: Pellerin Milnor Corporation M-120p 120-lb Capacity OPL Dryer Minimum Required Features and Specifications: General • Equipment shall be new, current production, equal to or better than Milnor Model M-120p. • Capacity: Minimum 120 lbs. dry weight per unit. Capacity and Construction • Cabinet: Fully welded steel construction, fully insulated. • Basket: Stainless steel, reversing type. • Fronts: Stainless steel. • Door: Double-pane glass, minimum diameter 31-3/8”, sill height 32-1/4”. • Cabinet dimensions not to exceed: o Width: 44-7/8" o Depth: 61-3/8" o Height: 88-7/8" • Must fit through a standard 48" doorway. Standard Features • Variable drum speed. • Pre-heat system. • Trans-axial airflow. • Direct spark ignition (for gas model). • Two-point roller support. • Intuitive microprocessor controls with auto-dry system (one-touch programmable). • Easy-clean lint screen system. • Fire extinguishing system. • Simplified inverter drive system. Performance • Shorter dry times through advanced airflow and control systems. • High energy efficiency to reduce utility costs. • Reliable long-term use with minimal downtime. • Microprocessor-based intuitive controls with full programmability. Safety • Fire extinguishing system (standard). • Door with double-pane safety glass. • Cabinet and airflow system designed to minimize overheating risks. Available Heat Sources • Gas: 250,000 Btu/hr input, 10” exhaust connection, blower motor 1 hp/3 hp. • Electric: 37–44 kW heat input, 10” exhaust connection. • Steam: 178 lb/hr consumption @ 125 psi max, 12” exhaust connection, 1” NPT supply & return. Optional Feature • Automatic Airflow Compensator – adjusts exhaust fan speed to optimize performance under back pressure. Electrical Requirements • Available in 120–480V, single or three phase, 50/60 Hz. • Bidder to specify exact electrical service and breaker requirements. • All components must comply with NEC and local codes. Approved Standard of Quality • Pellerin Milnor Corporation, Model M-120p OPL Dryer, or equal to or better. 2.3 DRAINAGE SYSTEM Drain Troughs with Lint Screens: - Quantity: Five (5) - Configuration: Each trough must accommodate two (2) washers - Material: Stainless steel or corrosion-resistant equivalent - Features: Integrated, removable lint screens PVC Drainage Components: - 3” PVC Pipe: Total Length: 24 linear feet (3 feet per washer) - 3” PVC 90-Degree Elbows: Quantity: Fifteen (12) 2.4 MOUNTING BASES - Quantity: Eight (8) - Material: Heavy-duty steel - Height: 6 inches - Compatibility: Designed to support Milnor 36026 V5J or approved equal
