A variety of projects encompassing any of the listed required services is possible. Firms would be required to process all required federal, state and local permit applications. The specific extent and scope of the engineering services require for any given project shall be subject to the approval and control of the appropriate representative of the Shared Services Entity awarding the contract. The successful firm(s) shall comply will all applicable federal, state and local statutes, rules and regulations. The scope of services for which responses to this RFQ are being requested are: 1. Bridge/Culvert Design 2. Bridge Inspections 3. Building Demolition Plans and Specifications (including asbestos inspection, mitigation and abatement) 4. Construction Inspection/Management (a) road/bridge (b) recreation (c) building/structure 5. Dam (design, inspection and permitting) 6. Design, Construction, Permitting and Operation of Wastewater Treatment Facilities (septic systems, package treatment plants, conventional biological treatment plants and industrial (landfill leachate) treatment facilities) 7. Design, Construction and Technical Assistance in regard to Operation and Maintenance of Sanitary Landfills (capping, cell design, leachate collection system, gas collection systems, annual topographic survey/capacity report, bioreactor design/operation) 8. Drainage Design 9. Electrical and Mechanical Engineering (including plumbing, HVAC and movable bridge) 10. Environmental Site Remediation (ie , asbestos, soil, wetlands, hazardous waste, etc.) 11. Environmental Studies, Assessments and Permitting (archeological, historical, rare and endangered species, wetland, UST, hydrologic studies, etc.) 12. Geotechnical Design, Investigation & Lab Services 13. General Solid Waste Facility Design, Permitting and Technical Regulatory Assistance 14. Geotechnical Engineering: Including, but not limited to, mechanically stabilized earth walls for vertical landfill expansion; exposed geomembrane caps and ballasts; and landfill design, construction and operation 15. G1S/Mapping Services (including GPS fieldwork) 16. Hazardous Waste Management, including, but not limited to, the planning, permitting, design operation and management of hazardous waste transfer and storage facilities 17. Highway Design and Permitting 18. Intersection Design (including traffic signal and roundabout design) 19. ITS Design (ATMS, Network analysis, CCTV, Conduit DMS) 20. Landscape Architecture
