Specifications include, but are not limited to: NEW ROOF SYSTEM DESIGN REQUIREMENTS 1. General: The Design Consultant shall provide the design and specifications to remove, dispose, and replace the existing failing asphalt roofing system along with evaluating for replacement all roofing system components down to the original decking. 2. Roof System Removal: The existing roofing systems, skylight, flashings, solar water panels, and gutters shall be completely removed to the original decking and legally disposed. The removal of the existing roof system shall be coordinated with the installation of the new roof system to prevent exposure to weather conditions and potential water infiltration into the buildings. Design documents shall identify all requirements for safety devices, need for chutes and/or cranes for roof material removal, dumpster location, protection from exposure to the weather, protection of property and personnel, building access routes and circulation patterns, contractor use of the premises, parking, security procedures, equipment and materials storage, waste disposal, etc. 3. New Roof System: The Consultant shall provide the design and specifications for a new asphalt shingle roof system that closely matches the existing roof system in addition to the removal and replacement of the center skylight. Remove all roof mounted equipment or features including roof exhausts, flashing, plumbing vents, antennas, satellite dishes, electrical connections, and any other roof related materials and provide the replacement per client request or reinstallation of those items in the design documents. The design documents shall specify that the roofing work must be protected, and the building made watertight at the completion of each day’s work. The existing asphalt shingled roof shall be replaced with fire-rated asphalt-fiberglass, 50 years, multi-layer, architectural shingles over an ice and water barrier. Replace all flashing throughout. All valleys shall be constructed with new open-valley flashing
