Specifications include, but are not limited to: • Set up necessary ground de-water pumps and equipment and de-water ground. • Pump outpool. • Remove proper Freeze-Out Plugs as water goes down. • Remove leaves and debris and clean out Main Drain Pits. • Drain and rinse Main Pool. • Pressurewash/acid wash and neutralize pool interiorsurface with proper concentration of Muriatic Acid and degrease surface. • Survey poolsurface with Borough Administrator or designee for anymasonry,tileor joint repairs. If any, quote price for repair and schedule work to be done as soon as possible. • Replace anymissing or loose tilesin the racing lines. • Filter and all equipment to be surveyed with BoroughAdministrator or designee and recommendationsfor maintenance, repair, etc. are to be made. • Remove manual hydrostat plugs or check if automatic plugs are releasing water pressure under pool. • Re-install pressure relief plugs. • Remove all inlets, outlets and skimmer winter plugs and store in pump house. • Important Note: Any surface coating for main pool will be evaluated upon draining and cleaning pool. • Apply one (I) coat to interior pool surface: apply #0 washed, bagged sandon the paint on the entire floorfor non-skid. Paint shall be Ramuc type DS water based acrylic white paint applied as per manufacturer specifications. • Replace, as needed, vinylstick-on depth markers located on the stainless-steel overflow gutter. • Install dive boards, handrails and ladders. Check for anydefect. • Advise Borough Administrator of any concerns or problems. • Every three years,starting after the 2014 bathing season, use a degreasing detergent to clean filter elements. • Remove plugsfrom manifold and store in Pump House. • Wash and clean out debris from filter tank making sure that there is no loose DE in the tank. • Remove sump pump and hose and store in Pump House. • Inspect condition of filter tank interior walls. • Inspect condition of sluicegate. • Make sure all DE grids are clean and inspected for damage.
