Specifications include, but are not limited to: AXLE CONFIG: 4X2; MISSION: GVWR: 46000; DIMENSION: Wheelbase: 171.00, CA: 96.00, Axle to Frame: 39.00; ENGINE, DIESEL: {Cummins L9 330} EPA 2021, 330HP @ 2200 RPM, 1000 lb-ft Torque @ 1200 RPM, 2200 RPM Governed Speed, 330 Peak HP (Max); TRANSMISSION, AUTOMATIC: {Allison 3500 RDS} 5th Generation Controls, Wide Ratio, 6-Speed with Double Overdrive, with PTO Provision, Less Retarder, Includes Oil Level Sensor, with 80,000-lb GVW and GCW Max, On/Off Highway; CLUTCH: Omit Item (Clutch & Control); AXLE, FRONT NON-DRIVING: {Meritor MFS-20-133A} Wide Track, I-Beam Type, 20,000-lb Capacity; AXLE, REAR, SINGLE: {Meritor RS-26-185} Single Reduction, 26,000-lb Capacity, Driver Controlled Locking Differential, R Wheel Ends Gear Ratio: 5.63; CAB: Conventional, Day Cab; TIRE, FRONT: (2) 315/80R22.5 Load Range L HSC 3 (CONTINENTAL), 481 rev/mile, 68 MPH, AllPosition; TIRE, REAR: (4) 12R22.5 Load Range H HDR2+ (CONTINENTAL), 479 rev/mile, 75 MPH, Drive; SUSPENSION, REAR, SINGLE: 31,000-lb Capacity, Vari-Rate Springs, with 4500-lb Capacity Auxiliary Multileaf Springs; PAINT: Cab schematic 100WK Location 1: 9219, Winter White (Std) Chassis schematic N/A; BASE CHASSIS: 171.00 Wheelbase, 96.00 CA, and 39.00 Axle to Frame.; AXLE CONFIGURATION: 4x2; FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.866" x 3.622" x 0.437" (276.0mm x 92.0mm x 11.1mm); 456.0" (11582mm) Maximum OAL; BUMPER, FRONT Omit Item; FRAME EXTENSION, FRONT Integral; 20" In Front of Grille; WHEELBASE RANGE 146" (370cm) Through and Including 195" (495cm); AXLE, FRONT NON-DRIVING {Meritor MFS-20-133A} Wide Track, I-Beam Type, 20,000-lb Capacity; SUSPENSION, FRONT, SPRING Parabolic Taper Leaf, Shackle Type, 20,000-lb Capacity, with Shock Absorbers; SPRINGS, FRONT AUXILIARY Air Bag, Right Side Only, Driver Control; BRAKE SYSTEM, AIR Dual System for Straight Truck Applications
