Specifications include, but are not limited to: STEEL DELINEATOR SIGN POSTS-GALVANIZED: Delineator posts shall be flanged channel section steel conforming to ASTM A 36/A 36M posts, galvanized in accordance with AASHTO M 111 (ASTM A 123). The post shall be 52 mm (2-1/16 in) wide and 22 mm (29/32 in) deep with a mass (weight) per meter (foot) of 1.67 Kg (1.12 lb.). The post shall have 9 mm (3/8 in) holes drilled or punched, before galvanizing, at 25 mm (1 in) on center along the center line of the web, beginning 10 mm (13/32 in) from the top and continuing 725 mm (29 in) down the post. All Delineator Posts must be 3/8" tapered at the end without the holes. U-CHANNEL SIGN POSTS-GALVANIZED: Steel “U” posts shall be new billet steel conforming to the requirements of ASTM A 499, grade “60” or ASTM A 576, grade 1070-1080, but with minimum yield strength of 551.5 MPa (80,000 psi). Post shall be galvanized in accordance with AASHTO M 111 (ASTM A 123). Posts shall be standard products manufactured by Nucor Steel Marion, Inc. All posts will have one beveled/tapered end. The weight per meter (foot) shall be a nominal 3.0Kg (2.0LB), 3.7 Kg (2.5 LB), and 4.5 kg (3 LB). The post shall have 9.5-mm (3/8 in) holes drilled or punched along the centerline of the web. The holes shall begin 25 mm (1 in) from the top of the post and continue at 25 mm (1 in) centers for the entire length of the post. Packing: 10 pieces per bundle, 5 bundles per unit Load for handling with fork lift.